[jflogerzi]

Originally Posted by Irace86.2.0

If someone was designing a turbo manifold for this chassis then they would want to lean the manifold towards the front to clear a spot for the downpipe and raise the turbo up higher. My G25-660 clone is a small turbo, but there is room for a large turbo if such considerations were made. Case in point can be seen here. Note the wastegate pointing forward, the turbo sitting to the top of the engine, but it also looks like he went to a remote oil filter to clear the intercooler pipe.

The downpipe should clear with a few centimeters all around after my provisions.

so pretty in that engine bay