Quote:
Originally Posted by Spuds
Well, I wasn't worried about the inside of the wheel, just the outside edge. I would expect the outside edge of the tire to be somewhere around 7-10 mm closer to the front or rear of the fender/liner when the wheel is fully turned one way or the other. If it's an inch or more of clearance as the closest approach, I agree don't worry about it.
There's no way your wheel and tire selection has too low of a load rating right? That would be weird.
Edit:. Also, you could try the "view wheels that fit" option and see what the difference is?
|
So here’s the odd part. Every time I put the wheel into the “view wheels that fit”, the wheel I want doesn’t come up… BUT same exact spec, but different wheel come up. Same 20x8.5+20.
The wheel I’m look at is TSW Tamburello in matte bronze
