Quote:
Originally Posted by NoHaveMSG
I would swap them for sure and set them on the softest setting for now if you have the time. Check your end link clearances. I would run a set of adjustable ones. I had issues with the fixed perrin rear endlinks pushing the top of the sway bar into the underside of the body when my car was lower. I run the Whiteline WHIKLC179 in the front and the WHIKLC182 in the rear.
|
I already have pre-shortened Whiteline front endlinks, but I don't have any rear end links currently. Once I get the car up on the lift i'll see if it becomes an issue and order some as necessary.