Thread: 200TW Tire Test
View Single Post
Old 07-19-2021, 03:27 PM   #26
jflogerzi
Senior Member
 
jflogerzi's Avatar
 
Join Date: May 2012
Drives: 2013 Series 10 6MT FR-S
Location: Moreno Valley, CA
Posts: 5,565
Thanks: 2,013
Thanked 2,043 Times in 1,474 Posts
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Garage
Quote:
Originally Posted by NoHaveMSG View Post
I finally have a significant amount of time on the RT660's. I would say they feel similar to the Dunlop Z3. A little less feel, a little more grip. Communication is decent, audibly and through feel. Wear is okay, mine have about 6 20 minute sessions on them and they are looking ok. I expect about 5-6 track days. Heat tolerance is okay, after a couple push laps you can tell they are starting to fall off, still reasonably quick but not quite there. After 4-5 hard laps they can use one slightly backed down, but still won't be quite as quick as the initial couple. They seem to like about 37psi hot. Any lower and they where starting to roll over on me. I initially ran them for 2 session about 3 weeks ago. Before this last track day I checked them with a cheap durometer gauge and they where clocking in around 68-70 shore A all the way across. After 4 sessions Saturday I checked them this morning, they are still reading about the same.
How would you compare these to Yoko and RE71s

Sent from my GM1915 using Tapatalk
__________________
2013 Series 10 FRS #553
RCE T2's, SPC LCAs -4/2.6 camber
JDL 4-2-1 EL, FP and OP, Tuned by Zach@CSG on e85
RR Wilwood Front/Rear Sport BBK, Motul 600 Fluid
ARC-8 17x9 SX2 GTs 245s/Koing 17x8 v730's 225's
jflogerzi is offline   Reply With Quote