Quote:
Originally Posted by pope
I am almost finished rebuilding a salvage BRZ Limited with front end damage.
The radiator support front cut I purchased from a local yard had some wiring harness scraps attached. This connector was part of the right side bundle that splits to feed the fans, horns, headlight, crash sensor, etc.
My car does not have this connector on it. There are signs that a previous owner made alterations to the wiring harness. There is also crash damage that severed some wiring (different color wires though).
So, I am trying to determine if this connector was:
a. an option my car did not have
b. removed by a previous owner for some reason, or
c. severed by the collision and to a part I didn’t know I need to find
|
@
pope @
Tcoat
That is the front turn signal connector for FRS. That 3-pin end connects to the the bulb holder on the signal itself.
Where the wires are snipped you would find the 4-pin connector, with 4 pinouts being: 1. Turn Signal (blinking), 2. Turn Running (steady, at night), 3. Fog, 4. Ground
See thread for additional pictures:
https://www.ft86club.com/forums/showthread.php?t=19169
You can see how to access the fog power via Toyota's instruction manual for FRS Fog Lights: PT413-18130.pdf