Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

gt7877 · 03-26-2020, 01:26 PM

Dear all

I have removed my turbo kit form my FRS + Ecu +imo ecu

And I install it to my friend FRS

I remove both ecu because it has ecuTek tune ..

My call ID was
ZA1JB01C

And I run the turbo car with no issue..

Now my issue

I have install the second car ecu + imo ecu to my car .

Call ID at this ecu :
ZA1JB01G

I have only install Cold air intake
And OFT STAGE 1 TUNE

but the issue now

When RPM hits 4k I hear something like knoking at driver side

It's start around 3900k - 4100k

Then gone

Only happens while driving ..
At stop and revs all r good

Any idea
Or could be the tune issue

Can I use other CID ??

Thnx

03-26-2020, 01:26 PM	#1
gt7877 Senior Member Join Date: Aug 2018 Drives: turbo frs Location: worldwide Posts: 173 Thanks: 122 Thanked 8 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	back to stock Dear all I have removed my turbo kit form my FRS + Ecu +imo ecu And I install it to my friend FRS I remove both ecu because it has ecuTek tune .. My call ID was ZA1JB01C And I run the turbo car with no issue.. Now my issue I have install the second car ecu + imo ecu to my car . Call ID at this ecu : ZA1JB01G I have only install Cold air intake And OFT STAGE 1 TUNE but the issue now When RPM hits 4k I hear something like knoking at driver side It's start around 3900k - 4100k Then gone Only happens while driving .. At stop and revs all r good Any idea Or could be the tune issue Can I use other CID ?? Thnx