Quote:
Originally Posted by EZx2
Hi, hopefully it will help here
(situation, when opening doors doesn't yield dome lights "ON", - but switch "ON position" does )
Steps to repair:
1. order new a1764 mosfet component.
2. When arrives, take your btu from under wheel (drivers side)- black box, sits inside white plastic with all wires...
3. Open the cover of unit, recognize burned component, replace
4. Install back
Good luck!
|
Hello @
EZx2, do this mosfet control ground circuit in unit? or whatelse?
I solved carry on another ground point on main harness and insert a by-pass from door open/close switch, at now all works fine. I damaged circuit of map light working for new led door.