Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Dyno results: TRD intake + Millers Oil = 6hp MORE than K&N drop in/silicone tube

86MLR · 10-26-2019, 10:27 PM

How do they compare in relation to m2.

Pre 17 OEM = 0.193m2

17 + OEM = 0.77m2

I acknowledge that the 17+ housings/intake tube and design are slightly larger/different but it was the filter design that was the main reason for the greater surface area.

If I recall correctly the K&N surface area is smaller than the 17+ OEM filter, the media in the K&N allows for more flow though.

Im off to google

10-26-2019, 10:27 PM	#11
86MLR Senior Member Join Date: Aug 2018 Drives: 2002 VX Commodore SS LS1 Auto Location: Sydney Posts: 2,203 Thanks: 500 Thanked 2,185 Times in 1,111 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	How do they compare in relation to m2. Pre 17 OEM = 0.193m2 17 + OEM = 0.77m2 I acknowledge that the 17+ housings/intake tube and design are slightly larger/different but it was the filter design that was the main reason for the greater surface area. If I recall correctly the K&N surface area is smaller than the 17+ OEM filter, the media in the K&N allows for more flow though. Im off to google __________________ Disclaimer: This post represents the official views of the voices in my head at the time of posting. http://www.ft86club.com/forums/showthread.php?t=133311 I'm only here for the biscuits Last edited by 86MLR; 10-26-2019 at 10:28 PM. Reason: Spelin