I make these myself, and I've sold over 80 so far, with no complaints! It's a plastic chassis with four, or six ON/OFF, SPST toggle switches. They have a red status LED on the tip, and are rated for 12V @ 30A. I make inserts in sizes to fit both push start and NON push start vehicles.
People have used this to control everything from Pedal Dance, to Radiator Fans, to Dashcams, to Radar Detectors, to Trailer Harnesses, to Driving Lights, to Underglow, to Air Compressors, to Active Exhaust, to Subwoofers, to Air Horns, etc...
This is designed to slot into the useless cubby hole in the lower dash. All you need to do is wire it up however you want for whatever accessories you have, and insert it into the cubby hole. You'll have to drill/cut out the back of the cubby to run wires, and I recommend a dab of glue in the long run once you finalize the wiring. A new trim piece is less than $5 at the dealership if this worries you.
PUSH START MODELS (smaller cubby)
$35 - Blank (cut your own holes)
$50 - 4 Switch
KEY START MODELS (larger cubby)
$65 - Blank (cut your own holes)
$75 - 4 Switch
$95 - 6 Switch
Shipping is $8/$10 anywhere in the continental US for the small/large panels. $14 international shipping.
PM me if you're interested!
Some Facebook-hosted photos. Let me know if they stop working:
