Quote:
Originally Posted by Sportsguy83
Hmm.. internet advice is bad, but it gets even worse without the full picture of whatever happened...
|
I dont want advice on what happened, only on resetting the ABS/speed sensor related code. But since there seems to be no answer whatsoever because either nobody knows how, or they seem to judge better not to give any advice because reasons... here's what it is.
I replaced one of rear wheel hubs because the bearing was starting to go. Apparently I didnt torque down the 4 bolts that hold the wheel hub from behind well enough because as the day progressed they backed out and the wheelhub had some freeplay in its position.
What I think happened, ABS sensor probably lost reading (since the ring that its reading is on the wheel hub, having some play it will not be facing the sensor while cornering. The car ran fine for 2 days, it only showed this syntomp at the very end of the second day, or some 4 hours of track time after.
I have taken all 4 sensors out, no damage, I cleaned them all up (some had brake dust all over them) and put them back. I did not run over anything, I did not hit anything, I just need to reset the damn code so I can get on with my life. Time trials begin in 4 wheels and I still have a metric ton of work to do on the car. Any kind of help is appretiated as I'd rather not put the car on the trailer, and spend half a day to drive somewhere, get charged $150 to push a button to reset the code and drive back.