Quote:
Originally Posted by maslin
My '17 is lowered on Eibach Pro. Toe will of course be off. Front camber doesn't really change, MacPherson struts in the front.
Rear camber will be way out, mine was -3/-2.5 degrees. Visibly bad. Moog LCAs and it's all dialed in, I did not need to install the offset rear toe bushings. SPC front camber bolts as well.
See my thread here, exact same situation.
https://www.ft86club.com/forums/showthread.php?t=132421
Before and after. Specs are in degrees and minutes, not decimals. |
Thanks a bunch! I actually remember reading your thread a while back but then lost track of it after my eyes started bleeding from reading so many posts. I guess I'll go ahead and get the bolts and LCA's to have for the install.