Quote:
Originally Posted by NoHaveMSG
I would imagine you would just want the links to be 90 to the roll bar at ride height. That way at full twist you don't get bind.
|
I will disagree. I am suggesting you want the links to be just over 90 degrees so that during travel they pass
through 90 degrees. The only end links I found that fitted this criteria, after using 1 or 2 different links, was to go with these:
Yes, they look cheap and nasty but they were able to cut to the length I wanted.
https://www.whiteline.com.au/product..._number=W23180