04-08-2018, 07:05 AM
|
#3
|
|
Senior Member
Join Date: Mar 2013
Drives: 2013 Scion FR-S Whiteout
Location: Vancouver, BC
Posts: 140
Thanks: 9
Thanked 6 Times in 6 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Originally Posted by phrosty
Hi guys, noticing a weird thing happening when I start the car after I reset the ECU -- disconnecting battery, flashing a tune, etc.
If the engine is warm, it'll stall out. I need to give it some revs to keep it alive, and get into gear at higher than idle revs or it'll die. Once it's in gear it's good to go.
If the engine is cold, it starts up and after the initial high RPM it dips down nice and low, not enough to sputter but enough that DRLs will dim out, and then recovers. My assumption is that the cold start routine is giving extra fuel and thus preventing the stall.
After I get it moving, lifting off the accelerator will cause a similar RPM dip as the cold start bit. Either way, after a few minutes of driving the car appears to calibrate and has no trouble starting up after that, warm or cold, and no RPM dip.
Any ideas to the cause or how to diagnose? I don't believe it to be a leak as fuel trims are spot-on, and I hear nothing out of the ordinary. It drives otherwise normally.
|
Did you ever get this resolved? I have a similar issue.
__________________
FBM Base Turbo Kit with GTX2867R and FlexFuel Kit with Walbro 485 / 550cc Injectors
EcuTek Tuned witih Greddy Profec @ 12PSI Shell 91-E73 and 18PSI E73
1993 Mazda MX6 N/A Fully Built on MegaSquirt (work in progress)
2023 Chevrolet Corvette Z51 Stock
|
|
|