Quote:
Originally Posted by fika84
Page 295 has all the part numbers. Same ones that I used for my 4.88 upgrade. And I put the seals into an IS300 m96 carrier. http://www.ft86club.com/forums/attac...5&d=1449908436
The shims you'll just have to order after you measure everything up... follow the service manual and take your time getting it all right. It's a tedious process and no one can give you all of the part numbers you're going to need up front.. |
I am not talking about shims, I do know each installation requires different shims but what about
:
-41201A 9036635133 BEARING, TAPERED ROLLER (FOR REAR DRIVE PINION
REAR)
-41201B 9036630093 BEARING, TAPERED ROLLER (FOR REAR DRIVE PINION
FRONT)
-41201C 9031138070 SEAL, OIL (FOR REAR DIFFERENTIAL CARRIER)
-41201D 9020135497 WASHER, PLATE (FOR REAR DIFFERENTIAL DRIVE PINION)
-41231 4123124010 SPACER, REAR DIFFERENTIAL DRIVE PINION BEARING
The above parts especially the bold ones are the same for EUDM factory 4.1, USDM factory 4.3 or preferably 4.56 final drive?
Cause I think the problem is with diff oil seal, spacer and washer!