Quote:
Originally Posted by Dee
Found my before and after sheet. .4mm toe in the left rear and .8mm toe in the right rear. He stated he could 0 the toe in the rear if he was able to put more negative camber.
And also he was able to get .2mm toe in the left rear with -1.3 camber, but the best he could do was .4mm with -2.1 camber on the right rear.
So that led me to believe he doesn’t know how to adjust the lower control arm possibly
|
You could run -2 both sides, IMO that's totally streetable if toe is minimal. You have 0.4mm+0.2mm = 0.6mm total rear toe-in, that's only:
sin-1(0.6mm/627mm) = 0.05° total, that's near enough to zero.
But yeah, with adjustable arms you'd think you could get it where you want it.