Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

Raven86Project · 01-18-2018, 10:17 PM

Hi! I want to maximize the width of my rear wheels (mainly for cosmetics) on the stock body and at the same time keeping the current stance (no poke or extra camber).

Currently the wheels are 18x9.5 +38 with 255/35. I took some measurements and there is a 28mm clearance between the rim and the strut. So, if I get them widened by 1" (25mm) there should still be 3mm of clearance (minimum recommended) resulting in 18x10.5 +50.

I want to keep this wheel model, which I love, and the closest spec from Work is 18x10.5+30 (20mm poke).

Is there anything else that I have to keep into account before proceeding?
Thank you all!

01-18-2018, 10:17 PM	#1
Raven86Project JDM Spirit of the '90s Join Date: Dec 2016 Drives: 2015 FR-S Turbo Location: South Florida Posts: 308 Thanks: 325 Thanked 482 Times in 210 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	18x10.5 +50 (rear) Will it fit? Hi! I want to maximize the width of my rear wheels (mainly for cosmetics) on the stock body and at the same time keeping the current stance (no poke or extra camber). Currently the wheels are 18x9.5 +38 with 255/35. I took some measurements and there is a 28mm clearance between the rim and the strut. So, if I get them widened by 1" (25mm) there should still be 3mm of clearance (minimum recommended) resulting in 18x10.5 +50. I want to keep this wheel model, which I love, and the closest spec from Work is 18x10.5+30 (20mm poke). Is there anything else that I have to keep into account before proceeding? Thank you all! __________________ IG: raven86project Build Thread HERE Last edited by Raven86Project; 01-18-2018 at 11:06 PM.