[8686guy]

So I now have the pain in the butt P0016 code.
Long story short:


August - Car was stock, got P0018, Dealer replaced the Cam gear and ECU
September - All's good and a EB Supercharger goes on the car, drive for 500ish miles, and I get a P0016 code.


I've done some looking and I'm hoping since the ECU and Cam gear was replaced already, that I don't have to do it again...
: I swapped oil/ ran some detergent through the car
: Cleaned the sensor
: I swapped sensors to see if the code followed, it didn't


Other items of note:
I am being tuned via ECUTEK
I'm running 5W30 Synthetic
Short of the exhaust and supercharger the car is mechanically stock.


I guess my question for those who have dealt with the issue before is where do I go next in my testing?
Is it possible to "Tune" out the code all together?
I imagine taking it to the dealer with the supercharger isn't an option...


Your thoughts are appreciated.
Thanks.