Quote:
Originally Posted by churchx
These kits are track focused, or some of them have dustboots and alikes, for use in eg. winter with roadsalt environment daily driving too?
|
All of our kits come with fully recessed dust boots. We did this for endurance race reliability, not to mention it's convenience for all weather driving as you mention.
Quote:
Originally Posted by churchx
What is rotor and pads thickness in these kits? How common are pad shapes in these?
|
The number after the rotor diameter designates thickness. IE 355.32.52 is our 355mm rotor which is 32mm wide, and our 330mm rotor (330.30.52) is 30mm wide. The third number is the 'swept area' of the pad, or pad annulus. We use standard FMSI pad shapes. For the 86, our 4 piston caliper uses a standard FMSI D592 pad shape, and the 6 piston uses the Brembo DR29 pad shape. These pad shapes are readily available from most pad manufacturers, and we also offer our SPP 1.0 and 1.5 street compounds, and SRP 100 race compounds in these shapes. Pad thickness' will vary by manufacturer, but are typically 17mm including the backing plate, though these calipers are designed to take a 21mm max pad thickness.
Quote:
Originally Posted by churchx
Is brake bias close to stock?
|
We engineer our kits to be within 1-2% of the stock bias when used with the OE master cylinder. Typically, OE systems are designed with a heavier front bias to promote understeer for safety. In this case, our kit shifts the bias ~1% toward the rear.
Quote:
Originally Posted by churchx
Do kits include steel braided lines?
|
Yes, all our kits include braided stainless teflon coated brake lines.
Quote:
Originally Posted by churchx
Also advising to post brake fitment templates in this thread for your BBKs. |
Thanks for the heads-up, I will do so now, and I'll attach it here just in case! Be sure to select 'Actual Size' when printing.
Front 4p 330mm template
86 Front 4P 330mm Fitment Template.pdf
Front 6p 355mm template
86 Front 6p 355mm Firtment Template.PDF
Rear 4p 355mm template
86 Rear 4p 355mm Fitment Template.PDF