Quote:
Originally Posted by CSG Mike
I use a @ DeliciousTuning MK1+ FF kit, which has an in-line fuel pressure sensor for monitoring pressure from the in-tank pump to the port injectors. |
Yeah, that works too but you need the flex fuel kit as well. Clearly, a great solution for people who want to run flex fuel. I can't get E85 near me so that system would be major overkill just to monitor fuel pressure. My solution used a $45 adapter, $20 sensor, $10 microcontroller and a $20 LCD. I will probably ditch the microcontroller and LCD and just datalog the voltage directly through the rear O2 port but on short notice it was easier for me to just cobble together my DIY setup.
-Matt