05-23-2017, 08:23 PM
|
#37
|
|
Banned
Join Date: Mar 2017
Drives: 2013 Subaru BRZ
Location: Alberta
Posts: 519
Thanks: 39
Thanked 162 Times in 109 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Originally Posted by ~el~jefe~
I drove out to the farther away beaches and lighthouse on this cold gray day with my girlfriend. As I was driving back, about to get onto the northern pointing parkways when I decided to test the grip and control of the car.
I took this turn at, when I looked down at the speedometer, 46 mph. Obviously stock with the performance package as well, for what it is worth here. I went around the needle on the inside circle.
I kept the rpm's quite low, at about 3400, only gasssing it to to 3900 out of the turn and then shifting to past 55 mph. It did this turn steady and smooth, minor amount of tire screech (just a tiny amount noticed). Traction control never came on, and when I turned right out of the turn quickly after a full 360, the car did not do what all other cars I have driven do, it did not snap back and forth. No motion, just redirected itself to where I went, no dramatics, no roll, no nothing.
this car is sick!
|
If you left the stability control on it isn't possible to snap the car out into a drift. There is supposed to be a new software version of VSC which does allow some oversteer angle before it intervenes. How was that? The old VSC just cuts the throttle and brakes a wheel before you get to any angle at all.
|
|
|