[steve99]

Originally Posted by neilvosko

thanks @steve99

do these logs require MAF scaling? or leave as is?
tough for me since i am not able to log MAF voltage.

http://www.datazap.me/u/neilvosko/lo...zoom=1472-1543

http://www.datazap.me/u/neilvosko/lo...1&zoom=517-609


thanks,
Neil

looks pretty good , slightly rich over 6000 rpm so if you take 4% off the current maf flow numbers over 120 g\s it should fix it, but not rearly that bad