View Single Post
Old 08-13-2016, 07:13 PM   #5
steve99
Banned
 
Join Date: Dec 2013
Drives: FT86
Location: Australia
Posts: 7,998
Thanks: 1,035
Thanked 4,987 Times in 2,981 Posts
Mentioned: 598 Post(s)
Tagged: 2 Thread(s)
Quote:
Originally Posted by EffaressNOOB View Post
http://datazap.me/u/taylorshift/oft-...l?log=0&data=1
@steve99
The link above is my data log for a few 3rd gear pulls at WOT and a 2-3 pull at WOT. Since I can't log my mafV or IAM, can you tell me if my car is safe enough to run on my setup or should I replace my Perrin 3" and go back to my stock air box. Seems to me that I'm running a little lean, but my LTFT even at CL never dips below -10%

For some reason, RomRaider keeps freezing every time I try to download my Close Loop data log.
Yes its running quite lean your CL target afr is 12.4 and your afr is 13.8.

I would not run with that setup without rescaling maf

or putting stock intake back on
steve99 is offline   Reply With Quote
The Following User Says Thank You to steve99 For This Useful Post:
EffaressNOOB (08-13-2016)