Quote:
Originally Posted by Walla Walla
i had the P2097 code yesterday, comming back from the track.
i cleared the code with OFT, and I've realised this morning that the pedal gas "lag" we normaly have after a "ecu flash" is back... is it normal? does it "restart" the flash when we clear a code?
I will have to check my exhaust line, as it hit the front subframe when i do hard left turn (OP/DP nameless on a OFT header), wich is probably one of the cause of this cel..
|
With that code id be checking for exhaust leak or intake or maf dirty
yes when you reset cel codes it resets ecu tune is not effected but learned arameters are lost, same as if you reflash or remove battery connection