Quote:
Originally Posted by adrixe
One question on everyone, just installed mine. And there's one bolt that I had a hard time to tighten. Its the bolt that is closest to the oil pan. Its a tight space and I feel that it will come loose in the near future. What tool did you guys use to get into the tight space?
Sent from my SM-N900W8 using Tapatalk
|
some people have used a u-joint or a crows foot. I used a 14mm deep socket with an extender, though I was very careful with the deep socket since it would not sit completely flat. I used a 6 inch extender with the deep socket to clear the header pipes.
though, I need to find time to get under my car and check all the bolts/nuts since after a track day, it sounds like I have an exhaust leak somewhere.