Quote:
Originally Posted by CSG Mike
It will log with just 3, but normally I lock on to 10+.
Tap the button on the top right, to the right of the clock. That'll let you individually shift.
The GPS pickup issue can only be corrected by using the same track map every time, and making sure you have a good GPS signal. 4-6 is actually very weak.
|
I will check the numbers of GPS signals logged on next track day. Is there a way to check this in the analysis software? I am using the same track map created on my first run about 10+ track days prior and have been using the same one for all my analysis so far. Care was even taken at that particular lap used to develop the track map to drive right in the center of the track at a slow speed. Tried using other laps to create a new map but the problem persists.
I am not sure where is this 'clock' that you are talking about. Is this on the "Measures Graph" tab or other tab? Do you mean Time/Dist as the 'clock' and snap ON/OFF button as the button to the right? Clicking on it does not change anything and I still cannot find a way to individually shift the distance axis to match up the position on the track.
I am using RS2Analysis 2.55.32 btw.