Quote:
Originally Posted by Mark99es
Anyone willing to give some advise of a decent base line on shock settings for off the self Koni's? I have the TRD rear bar and springs. 22mm Whiteline front bar. I run one event in the car and had factory rear bar on the car. had rebound full hard on rear and almost full soft in the front to help the car rotate (rear TRD bar should help). This does not seem like a conventional baseline. haha
Thanks in advance
|
If you run rink a dink lots, and barely get into 2nd gear...you might have to keep these settings. As the speeds increase, and slaloms/transitions become higher speed, is when you need to dial more rebound into the front. I have essentially the same setup. I typically start around 3/4 from full stiff in the back, and 1/2 a turn from full stiff in the front, and make adjustments on a 1/4 turn basis.