Quote:
Originally Posted by dinoniel
On my BRZ Limited I was able to run the wire to the side of the light and have it sit flush without cutting/drilling, but my wire went to the left of the license plate light whereas yours is to the right. I'm not sure if maybe theres more space towards the left of the light, but your wire may just be too thick. It might be worth a shot to try.
Also in case you didn't know, you can run the wire from the trunk lining to the inside of the car through that rubber grommet on the left of your first picture.
|
this was installed on a rush for testing. I have wires running through that grommet from when I had backup tag lights.
Maybe in misunderstanding but aren't the two lights the same? Can't see you having better luck in the other side. This is a Siamese RCA so probably just too thick...
Sent from my SM-N920T using Tapatalk