Quote:
Originally Posted by steve99
bummer
that cam code loks like a hard one to track down when its intermittent
have a look at the Tech service bullitens it can be
position sensor
sensor shimming/clearance
oil control valve
actual cam sprocket/actuator
or the ECU rom revision if earlier than B01C/D
or the ecu hardware
their is a long test proceedure to follow to try to isolate exact cause
|
But did you monitor how well the cams correspond with each other? I've been monitoring how the intake valves were corresponding with each other
Sent from my LG-D850 using Tapatalk