[Wayno]

Originally Posted by Wepeel

Noticed something strange this weekend. I'm running OFT+OFH with the OTS Stage 2 UEL map. On the highway, cruising ~70mph, I glanced at my torque app and noticed meaured AFR's in the low 12's, rock steady LTFT, STFT of 0.0, and a commanded AFR of 14.7. This remained for quite a while, I changed loads and throttle and rpm (even brought the car to a stop and idled the engine), and still saw that it was stuck in Open Loop (STFT of 0.0 and AFR give it away). I could tell that data wasn't hung up (MAF, AFR, other monitors were updating).

Once I restarted the car it was back in closed loop when it was supposed to be. Anyone else seen this happen? Any ideas if there's some condition out there that would trigger constant open loop?

Full mod list - OFH, OFT, catted front pipe, stock OP, stock catback, stock intake, stock filter.

Don't use torque ffs, if you have an oft there's no reason for you to ever plug in a shitty bluetooth dongle.