[swarb]

Originally Posted by FRS Justin

The rods usually break off at the big end and swing around and cut the block in half (ok not in half but put big windows in the top of your block)

rods beginning to fail here(they should not have a bend in the middle lol)
http://www.ft86club.com/forums/showthread.php?t=98229


Element tuning goes into great detail about oiling issue


http://www.ft86club.com/forums/showt...oil+starvation

So what it is? Failure because of weakness or failure because of oil starvation? Two different symptoms, one part. Oiling can be addressed with some work.
What specific part are you talking about? the rod cap? the rod? the bolt? the nut? the bearing? LOL you aren't clear on your "theory" it is just as bad or worse than saying "the tune" as it is "the rods"