Quote:
Originally Posted by fenton
There will be one connection that you disconnect which is the wot switch cable, from there you will connect the little procede cable that you soder or connect to the procede black signal wire.
Sent from my SM-G920W8 using Tapatalk |
Yep. I have the WOT switch cable and the PROcede signal cable routed together to the ESC controller so that I can swap back and forth, as needed. So just picture the WOT switch connector dangling next to the PROcede cable shown in the image and that is how I am currently setup.
--
Whoops! I just saw that your image shows that, the WOT switch is just pulled back into the plastic wire loom.