Quote:
Originally Posted by Machfleury29
I was planning on putting new wheels and tires on soon.
i was looking at Avant Garde M310's 18X9 +30, TSW NURBURGRING 17X8 +35MM, or ENKEI RAIJIN 18X8 +48MM. I wanted to go with a 235/45 would there be any rubbing issues with these?? really wanted to make sure before i buy. i also plan on lowering 1inch.
Thanks
|
All over the map here:
- 18x9 +30 will poke so make sure you have enough camber to make it work. Springs will likely not be enough (natural camber from drop), so crash bolts/camber bolts should do it.
- 17x8 +35 should be fine with no issues
- 18x8 +48 will be tucked in alot, but will fit. You will be able to lower it but will be limited to the amount of negative camber you can add. (Note: Raijin's are likely +45 offset in that size)
Tires:
Get the wheel sorted out first, then you can worry about tire sizing. All 3 of above choices should have a different tire size.