Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Is it possible to add shift paddles to the GT?

Wayno · 07-10-2015, 02:54 AM

The TCU would be exactly the same as it takes the EXACT same inputs whether it's GT/GTS or whether it's shifter/paddles. All the paddles do is perform the exact same function as the shifter in M. I think you'd just need the wheel and maybe a loom from a GTS. If you're lucky the loom might already be in the GT column. Contact Kalen Gray and see if he has any AT wrecks.

Best case is you remove the wheel and find 2 more pins on the column side of the cruise control plug that aren't on the wheel side.

Worst case you need to get a whole column and run wires to piggyback on to the 2 switches in the floor shifter.

07-10-2015, 02:54 AM	#18
Wayno Senior Member Join Date: Apr 2014 Drives: Toyota 86 GTS Location: Australia Posts: 1,129 Thanks: 453 Thanked 896 Times in 424 Posts Mentioned: 211 Post(s) Tagged: 0 Thread(s)	The TCU would be exactly the same as it takes the EXACT same inputs whether it's GT/GTS or whether it's shifter/paddles. All the paddles do is perform the exact same function as the shifter in M. I think you'd just need the wheel and maybe a loom from a GTS. If you're lucky the loom might already be in the GT column. Contact Kalen Gray and see if he has any AT wrecks. Best case is you remove the wheel and find 2 more pins on the column side of the cruise control plug that aren't on the wheel side. Worst case you need to get a whole column and run wires to piggyback on to the 2 switches in the floor shifter. __________________ rom downloads, information and examples Toyota 86 GTS OFT - Guide To Dialling In OTS Base Tune OFT - Example Alternate Maps for AT, 98RON, E85, MAF Scales Last edited by Wayno; 07-10-2015 at 03:15 AM.