Quote:
Originally Posted by ztan
Was just about to post those A01G defs for you. I had pulled them from the OFT .xdf tuner pro defs that Shiv released orignially (A00C).
Seems that bit of code is not used in AT if it is showing 1.4g/rev load (unless the logged valued used is before it gets cut by the engine load limiter). Which parameter address are you using to log load?
I have logs from my A01G ROM showing 1.3 g/rev (and lean) under boost!!! My engine load address = 0xFFF89148
|
I'm using OFT to log so the addresses are nicely hidden away. @
steve99 would know which address on tactrix it matches, but I would guess it's the same as what you would use normally whenever you wanted to view load.