Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - No bolt threads on the Valenti Style Reverse lights?

autograph · 03-28-2015, 06:20 PM

I bought the following reverse light: http://store.ijdmtoy.com/Valenti-Sty...tion-a/617.htm

the instructions say to install the reverse light just like you uninstalled the stock reverse light. on top of the stock reverse light, there are two bolts. However, when I went to put the bolts into the new reverse light, nothing was catching -- as if there is no thread-hole at all. All that is holding it currently are the two side plastic screws and the plastic clip on the middle/bottom. Not sure if this is safe. Anyone with these reverse lights care to input?

Thanks!

03-28-2015, 06:20 PM	#1
autograph Senior Member Join Date: Dec 2014 Drives: 6MT Hot Lava Location: New Jersey Posts: 123 Thanks: 72 Thanked 41 Times in 20 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	No bolt threads on the Valenti Style Reverse lights? I bought the following reverse light: http://store.ijdmtoy.com/Valenti-Sty...tion-a/617.htm the instructions say to install the reverse light just like you uninstalled the stock reverse light. on top of the stock reverse light, there are two bolts. However, when I went to put the bolts into the new reverse light, nothing was catching -- as if there is no thread-hole at all. All that is holding it currently are the two side plastic screws and the plastic clip on the middle/bottom. Not sure if this is safe. Anyone with these reverse lights care to input? Thanks!