Quote:
Originally Posted by protpibe
-Use 2 crush washers and high temp thread sealant on the oil pickup line (on top of the pass side of the engine)
-Be very careful with torquing the header on (27ft lbs I believe. Confirm first), and also make sure you torque it similarly to a wheel (one bolt per side at a time)
-Use hairspray to lubricate the intercooler piping when sliding it in to the silicone piping
-Get a rivnut tool to bolt the intercooler on
-take your time with the oil scavenging pipe install. it can get messy if you don't
Everything else is as described in the instructions.
|
what size crush washers did you need?