Just about finished with the install!!!
I've put a lot of time and effort into making everything look as clean as possible. All couplers, clamps, vacuum lines etc. are tucked away, and all of the hose clamps are rotated to expose the smooth side while still being accessible to tighten/loosen.
I also mounted the oil reservoir where the windshield washer bottle would normally be. I took my time and mocked it all up to insure everything cleared. Checking the oil level is still relatively easy. All I have to do is unplug the headlight bulb harness from the headlight and I have full access to the filler cap. I'll have to use a long funnel to refill for maintenance in 2 years, but I'll manage.
This allows the lines to be very short and makes for an extremely clean looking install.
Once the front end is re-assembled the only part of the oiling system you'll see is the filter... but you really have to look for it.
Well worth the extra time and effort.
Now I'm just waiting on my base tune from @
moto-mike so I can prime the oil system and take her out for a drive!