Hey guys
Finally was able to finally tune the car here is a list of upgrades
Fuel: pump 100 octane W/ AEM water/meth injection
ECU: Mortec M150 GT86 kit
turbo: ptunning kit with 3" down pipe but (perrin Back mufflers)
susp.: TRD
F/Pump: Stock
RPM: 8000 redline
the water/meth system comes online at 8lbs.
At the end, I could tell the recirculating waste gate and the Perrin 2.5Inch muffler at the End was restricting a bit so I believe it has a few more ponies left in her. the Dyno was reading a peak of 22 and going down to 20lbs but on the Aem tru boost the dial was reading a peak of 20 and coming down to 18 lbs. so I do not know take your pick...jejje
For some reason, I could not hook up the RPM signal, I could not find an easy Source so if anybody knows how to do it please show me because really what to see the Spool with rpm and the TQ #
All runs where done in 4th gear... but I also felt the Tires R888 (worn) fighting for traction so dont know if that had any downsides. anyway really happy with the outcome.....
Anyway feel free to ask away if you have any questios.
tried loading a little video but its not working I will keep trying
ok loaded it to youtube.
PS.. do not look at the AFR it was out of wack so we had to use the internal Wideband from motec
Alf