[Wayno]

Thanks guys. This is pretty much the single most important thread for AT owners.

For future reference the recommended flow is:
1. From transmission to bottom of auxiliary oil cooler
2. From top of auxiliary oil cooler to center line of heat exchanger
3. From outside line of heat exchanger to transmission using factory hose.

Thanks to sithspawn for sharing all the data from testing and nlowell for the hose direction.

I really didn't like pushing the "quick mounting kit" plastic bits through the condenser and radiator. My poor car!

I bought 3m of hose and had to use the absolute shortest route including mounting the cooler on its side and when it came time to cut the loop at the heat exchanger to connect it up, I was really pushing it. Buy 5m hose to keep your options open.