Yeah I want to put mine before the heat exchanger, so it looks like I'd use the other line (towards the inside/front of the heat ex) than the one nlowell used (on the outside/rear of the heat ex)...
Quote:
Originally Posted by nlowell
I cut the hose exiting the stock transmission cooler, inserted my custom reducer, ran the braided hose down the drivers side, across the crash beam, to the passenger fog area where the cooler is, then back the same way and back into the transmission using the 3/8 to 1/2 barbed adapter and the existing stock hose still connected to the transmission inlet.
|