Quote:
Originally Posted by sk47
Hello; Sounds like a lubricant is being sprayed into a bell housing to lube the moving parts of the clutch linkage. There is a risk of getting the lube onto the clutch disk itself. This can cause the clutch to be very grabby when engaged. I would be prudent applying a lube this way.
If the lube can be put into a boot that is mostly external to the bell housing the risk of clutch contamination may be less.
|
Good to know, thanks for the tips. I wasn't sure since it's kind of hard to visualize all the parts within the housing. I'll keep this in mind if I ever have to relubricate the assembly.
Here's a thread on replacing the clutch that has some good pictures of what's inside the housing.
http://www.ft86club.com/forums/showthread.php?t=25054