Hey guys I'm going to be installing the brz headlights onto my FR-S pretty soon. One problem I have is that one of the headlights I received is missing the 8-pin connector and the wiring harness was also cut off from the bottom (see attached picture).
My question is what would be the most ideal solution to fixing the wiring? I was thinking of buying a new wiring harness on ebay but I'm also willing to solder on new wiring with extensions. Doesn't seem too difficult and I believe I would need 10 or 12 gauge wiring?
I already ordered two 6 pin connectors from an early 2000 MR2 so I just need to figure this issue out.
