Quote:
Originally Posted by Low&Slow
Hello all! I've searched through the forum, and i couldn't find anything regarding this; but do any of you guys know if you have to cut your stud down if you are to use a 20mm spacers or adapter? I know 15mm spacers/ adapters, the stud protrudes out and you would have to shave the stud down.
|
Check out posts number 97 through to 101 on page 5 of this thread.
http://www.ft86club.com/forums/showt...t=46901&page=5
If using the stock wheels that have cavities in then you won't need to grind.
I have TRD SF2 wheels with no cavities and the 20mm ones wouldn't work as I wasn't prepared to grind the studs and even if I did the lug nuts would have sit a little proud.