Quote:
Originally Posted by dtek
I'm currently running 1.59 stage 1 OTS tune in the car. The OFT straight out of the box didn't want to play nicely with my ECU – it wouldn't recognise the preloaded dev tunes whatsoever.... ie, the OFT when initially plugged to my ECU (after connecting online to DL the latest firmware, then reading the OEM tune, etc) decided there were no Shiv tunes on it at all.
Only way round that: to load up the OTS BIN tunes dowloaded from the website (Thanks to Dean's advice on that one). So I have gone through manual adding of tunes to the OFT, worked fine with Shiv's files, and they upload to the car no worries.
I'm back to square one though – there is something about these 'aussie' tunes which is either corrupted or some other techical problem to do with the checksum. Unfortunately I don't know enough about software in this context or on this platform to make any further educated guesses.
Admittedly, I haven't tried opening the page 1 98RON G tune and copy/pasting the ignition values and saving as a new file... but I would like to solve the mystery of why only my checksum errors seem unsolvable, seems like a good technical skill to acquire...
While we're at it, here's a quick and not all that ideal log file: Is there enough knocking here need the Oz 98RON spec tunes?
http://datazap.me/u/dtek/stage1?log=0&data=1 |
Looks like it would benefit cannot see the knock in that log but your IAM started at 0.81 and is recovering towards 1 so their was some knock previous to log.
Do you know what your stock ROM CALID is ? the OFT needs to see roms of same calid or it wont load if your car is quite new it may have an A02I or D00I rom, if you have loaded a tuned ROM from openflash you will inherit its calid which may not be same as the stock ROM.
Just post up your stock ROM and I will be able to tell you. shiv caters for 700I A00I and A01I.