Quote:
Originally Posted by K-NoMs
I have a Series.Blue and love the rims, but would like for a more flush look. I was thinking a 1 inch drop, and 20mm spacers on front and 25mm on rear. Any recommendations for products or advice before I do anything regrettable?
|
I have one inch drop or slightly more and 25mm spacers all around.
I have 18x7.5" +46 TRD wheels all around and the spacers I reckon are the best bang for buck mod you can do. Hardly any cost and car looks so much hotter (and that's according to my wife). Makes my wheels effectively 18x7.5 +21 so you can compare here. My flush fit is pre-populated as the existing so you can enter what your setup will be and check poke. Rear is perfect for me but I reckon front could do with 5mm less poke.
http://www.willtheyfit.com/index.php...et2=40#content
I would like 20mm on front as I think 25mm has about 5mm too much poke (but 25mm is great anyway) but am using the spacers that have new stud bolts and the 20mm spacers mean the existing studs extend a little too much for wheel to sit flush against the spacers so be careful. Depends on your wheels if the 20mm spacers with new studs will work for you. Your wheels will need indents between the existing stud holes.
These are the spacers I have. Great quality but many other brands out there that will be more local to you
http://www.redlineperformance.co.nz/...-5-x-100-25mm/