Quote:
Originally Posted by Brinks
I seriously doubt that your issue is with multiple shifter manufacturer's. Your either getting the vibration from an installation error or vibration sent up from your exuast hanger. You should stop blaming other people and get under your car and start troubleshooting. I would try to use some rubber gaskets at the exhaust hanger to try to insolate that area of contact. I'm not saying that's your issue but it could be a possibility.
|
Ah ha. That's a new and good call - the hangers are stiffer and provided by Nameless when I put on their exhaust. I am not "blaming" anyone. I have only pointed out that both brands rattle and the stock one doesn't and that this is a flaw.
TWM also says theirs is "rattle proof" - a bold statement when in fact it can indeed rattle.
It is NOT an installation error. The guys that work(ed) on it are pros and have done a ton of these.
Who knows what the shifter would do with engine and tranny mounts. Probably explode.
I will revisit the STS install later. For now, I am enjoying the stock silence. I will probably try the mtechs and also see how it feels after the trans fluid is swapped.