Quote:
Originally Posted by deliroast
Just about to order these. How was the DIY?
Sent from my iPhone using Tapatalk
|
Not to bad... The fronts were cake.. Haven't done the rears yet.. just did the fronts for another set of rims that needed a 5mm spacer to clear the brakes..
you need an old lug nut to pound the old studs out.. then remove the brakes and re-install ... took about 60 min for both sides..in the front.. Rears will go on another day.
I would HIGHLY reccomend this as it makes the job a helluva lot easier..
http://www.toolpan.com/Lisle-22800--...3_a_7cLIS22800
Bill