Agreed with everybody above. The thread was originally for technical discussions. I myself have been patiently waiting and have been biting tongue. IMO, alot of the questions regarding order status, etc seems should be sent directly to FT86SF (I myself have checked my status via e-mail, and Yo was very prompt in replying)
Now back to the technical info. I've done some research ahead of time in prep for my install. Here's is what I've found, but I'll let @
FT-86 SpeedFactory verify.
Quote:
Originally Posted by fazm
Torque requirements on the block to the header, --> 22 ft-lbs per Borla install instructions
Torque requirements on the header to the overpipe: --> 38 ft-lbs per Perrin overpipe install instructions
Torque requirements on the overpipe to the front pipe:--> 38 ft-lbs per Perrin overpipe install instructions
|
Also, some extra: Torque spec for engine mount (since I've had to jack up the engine to install my Nameless over/front pipe) -->
62 ft-lbs
Hope that helps
