|
So I got it all working, I attached both the "Back" wire coming from Ca-Fi and the power wire coming from my Rear camera to one single pin and plugged that into the SWC harness with my AUX port wires. It hit's pin 2, the brown/silver wire and it every time I go into reverse, the image pops up nicely. The only other issue I encountered was that the stock brackets have 2 bumps that are supposed to line up with holes on the HU so you can line it up to the correct screw holes. It didn't seem to fit in any way where I could screw it in correctly, so I drilled out the top bump on each bracket and was able to secure all 4 screws easily. The face plate didn't go on as easy as I thought it did on stock HU, might be sticking out just a millimeter farther than it should? Oh well, it's all up and running and really nice. Oh, and my AUX port works great now after the pin swaps I made via the diagram I linked.
|