Quote:
Originally Posted by Deathalo
Ok, so far, I've hooked things up but not installed permanently due to a few issues. First, can't get the backup camera working, I have a rydeen duo with an RCA output and a red power cable that is supposed to get power when shifting into reverse. This worked on my stock BRZ HU with the help of SVXdc's harness. I hooked that power cable to the "Back" brown wire coming from the Ca-Fi's black harness and tried both the Reverse Video In and regular Video In with no image when shifting to reverse.
The other issue is the aux port, I'm getting audio, but it's very quiet and lacking depth. I looked at where the wires were hooking up to the AUX harness in the back and I used the blue/orange and blue/yellow pins for the white and red wires respectively and the blue/white pin for the ground (I also tried the orange for ground, no difference heard). I noticed, @ SHIFTER, you mentioned you tapped into the pink/green wire, not sure if it's different on the FR-S, but I didn't see the pink wire going to the AUX port. Maybe the AUX port just sounds like crap in general, I'll live with it. But really want to get the backup camera sorted out tonight. |
First of all - on the CA-FI harness did you hook up the reverse wire for the camera to turn on? this wire is not hooked up to anything on the harness when you get it. You will need to wire it in to the correct wire on the factory harness to kick it on. Simply plugging in the camera will not kick it on.
Also go into settings under car settings and make sure your reverse camera is set correctly.
As to the aux port, I had fuzzy sound when my pins where not fully seating. Check to make sure they are getting good contact. Otherwise i'll double check the exact wiring for the Aux jack in the next day or so when I get a chance to yank my unit. Its literally been a year since i wired my aux jack in for a aftermarket unit